|
1951 Chevy Accessories Installation Manual |
|||
 |
as shown
in Figure 25.
3. On
deluxe models replace trim rail and reinstall back rest in
car.
REAR SEAT CUSHION
1. Place
seat cover over seat cushion and line up seams and floor tunnel "cutout" hog
ring as shown in Figure
26. |
||
 |
|||
|
Figure 23 |
|||
 |
|||
|
Figure
26
2. Replace
rear seat cushion in car. FRONT SEAT
BACK REST
1. Remove robe cord as shown in Figure
27. |
|||
|
|
|||
|
Figure 24
Approximate Flat Rate
Time 1 hour. SEAT
COVERS
Procedure
for Installation of
All Types
of Seat Covers on
Two-Door,
Bel Air and Convertible
(Fiber -
Plastic - Rayon)
1, Remove rear seat cushion and
back rest from
car.
REAR SEAT BACK
1. On deluxe models remove top trim rail from
back rest. NOTE: "Special"
models not equipped with trim
rail.
2. Place seat cover on back rest and line up
seams with contour of back
rest, hog ring |
 |
||
|
Figure 27
2. Place seat cover over back
rest and work down evenly, about two inches on each
side |
|||
 |
|||
 |
|||
|
|
|||
|
Figure 25 |
Figure 28 |
||
|
|
|||
|
11 |
|||
|
|
|||