|
1951 Chevy Accessories Installation Manual |
|||
 |
|||
|
|
|||
|
Figure 225 |
|||
|
|
|||
|
12. Fill jar with clean water up to the lever
line as indicated. Do not use
a dirty or greasy container or
pour water through a dirty
funnel, as dirt or small particles will clog jets.
13. Remove plugs and flush out tubes by
turning water. See that
all fittings and tubes are
tight and that tubes are connected to the proper outlets.
14. Insert Jets into windshield wiper housing.
Aim jets so that stream
strikes glass at upper wiper
arc five inches from windshield division strip, as shown in figures 226 and
227. |
 |
||
|
Figure 227 |
|||
|
|
|||
 |
|||
|
|
|||
|
Figure
226 92 |
|||
|
|
|||