1942 - 1947 Chevrolet Shop Manual



	*8-4*

	muffler, supports the muffler by a detachable strap around the body at the center section of the muffler. At the back end of the muffler, the tail pipe slides over the muffler outlet pipe and is held in place by a clamp similar to that at the front end. The back end of the tail pipe is supported by a clamp around the pipe and a support to the frame.	When assembling a muffler and exhaust pipe, all clamp bolts and the muffler strap bolt should be left loose until all parts are in correct relation to each other. Slight rotation of the muffler may be necessary to properly line up the inlet and outlet pipes. After arriving at correct positioning of all parts, tighten the front muffler and exhaust pipe clamp before tightening the rear and strap bolts.

	SERVICE NEWS REFERENCE

	MONTH PAGE NO.	SUBJECT